The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare to attach flexible cord/cables(s) and plug(s).
|
|
Work is planned and prepared to ensure OHS policies and procedures are followed, and the work is appropriately sequenced in accordance with requirements. Completed |
Evidence:
|
Condition and ratings under which the flexible cord/cable(s) and plug(s) are to operate is determined from requirements and in consultation with appropriate personnel followed by written instruction. Completed |
Evidence:
|
Flexible cord/cable(s) and plug(s) are selected to comply with standards and requirements for the condition and rating to be determined. Completed |
Evidence:
|
Materials necessary to complete the work are obtained in accordance with established procedures and checked against job requirements. Completed |
Evidence:
|
Tools, equipment and testing devices needed to carry out the work are obtained in accordance with established procedures and checked for correct operation and safety. Completed |
Evidence:
|
Flexible cord/cable(s) is prepared without damage to insulation and conductors and in accordance with requirements. Completed |
Evidence:
|
Attach flexible cord(s)/cable(s) and plug(s).
|
|
OHS policies and procedures are followed. Completed |
Evidence:
|
Single insulated metal framed equipment is earthed in accordance with requirements. Completed |
Evidence:
|
The integrity of double insulated equipment is maintained in accordance with requirements. Completed |
Evidence:
|
Conductors are connected to terminals in accordance with requirements to ensure the required polarity is affected. Completed |
Evidence:
|
Test equipment for operation and safety.
|
|
Appropriate tests of the cord/cable(s) and plug(s) connected to the electrical equipment are conducted in accordance with requirements and to established procedures to ensure safe installation and operation. Completed |
Evidence:
|
Ongoing checks of the quality of work are undertaken in accordance with established procedures. Completed |
Evidence:
|
Locate and repair fault(s) in attached flexible cord(s) and plug(s).
|
|
Electrical equipment and attached flexible cord(s) and plug(s) are isolated, where necessary, in accordance with established procedures. Completed |
Evidence:
|
Other OHS policies and procedures are followed. Completed |
Evidence:
|
Visual checks of the attached flexible cord(s) and plug(s) are carried out in accordance with established procedures to detect any abnormal or obvious damage or fault. Completed |
Evidence:
|
Fault(s) in attached flexible cord(s) and plug(s) are confirmed and components to be replaced are determined and details recorded in accordance with established procedures. Completed |
Evidence:
|
Fault(s) in attached flexible cord(s) and plug(s) are repaired in accordance with established procedures, where necessary. Completed |
Evidence:
|
Approval is obtained in accordance with established procedures from appropriate personnel, before any contingencies are implemented. Completed |
Evidence:
|
Provide status report(s).
|
|
Status report(s) are completed and notified in accordance with established procedures. Completed |
Evidence:
|